 Friends links |
|
| Picture |
Heading |
Updated |
 |
Silicon Brass
Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should |
2017-11-02 |
 |
Brass Solder
Brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well |
2017-11-02 |
 |
Copper Nickel Alloys
Copper Nickel Alloysis applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc. |
2017-11-01 |
 |
Powdered Brazing Flux
Flux has lower melting point than brazing filler metal, good surface activity. It can break or dissolve metallic oxides on the surface of work and brazing alloys during the process, which is good for the liquid brazing alloy wetting the surfaces to permit |
2017-10-28 |
 |
Nickel Bronze Brazing Alloy
Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig |
2017-10-20 |
 |
Sn-Ag-Cu Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-10-06 |
 |
Vacuum Brazing Paste
Vacuum brazing alloy can be made into paste. Metal powder in the paste including BVAg-8,BVAg-8b,etc. It is suitable for narrow gap and automatic brazing of complex components, and easy to use. It cansave the dosage，and be used in vacuum atmosphere with hi |
2017-10-03 |
 |
Flux-cored Aluminium Brazing Alloy
The Aluminium brazing alloy can be made into flux cored brazing alloy. Flux cored Aluminium brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption. |
2017-09-30 |
|
